Press enter to see results or esc to cancel.

Shang Poh Poh in Singapore Radio
  1 Comment

Singapore’s Digital Radio!

In digital broadcasting systems, the analog audio signal is digitized, compressed using an audio coding format such as AAC+ (MDCT)[1] or MP2, and transmitted using a digital modulation scheme. The aim is to increase the number of radio programs in a given spectrum, to improve the audio quality, to eliminate fading problems in mobile environments, to allow additional datacasting services, and to decrease the transmission power or the number of transmitters required to cover a region. However, analog radio (AM and FM) is still more popular and listening to radio over IP (Internet Protocol) is growing in popularity.

In 2012 four digital wireless radio systems are recognized by the International Telecommunication Union: the two European systems Digital Audio Broadcasting (DAB) and Digital Radio Mondiale (DRM), the Japanese ISDB-T and the in-band on-channel technique used in the US and Arab world and branded as HD Radio.

An older definition, still used in communication engineering literature, is wireless digital transmission technologies, i.e. microwave and radio frequency communication standards where analog information signals as well as digital data are carried by a digital signal, by means of a digital modulation method. This definition includes broadcasting systems such as digital TV and digital radio broadcasting, but also two-way digital radio standards such as the second generation (2G) cell-phones and later, short-range communication such as digital cordless phones, wireless computer networks, digital micro-wave radio links, deep space communication systems such as communications to and from the two Voyager space probes, etc.

A less common definition is radio receiver and transmitter implementations that are based on digital signal processing, but may transmit or receive analog radio transmission standards, for example FM radio. This may reduce noise and distortion induced in the electronics. It also allows software radio implementations, where the transmission technology is changed just by selecting another piece of software. In most cases, this would however increase the energy consumption of the receiver equipment[citation needed].

One-way (broadcasting) systems

It has been suggested that this article be split into a new article titled Digital radio broadcasting. (Discuss) (February 2019)

Broadcast standards

Digital audio radio service standards may provide terrestrial or satellite radio service. Digital radio broadcasting systems are typically designed for handheld mobile devices, like mobile-TV systems and unlike other digital TV systems which typically require a fixed directional antenna. Some digital radio systems provide in-band on-channel (IBOC) solutions that may coexist with or simulcast with analog AM or FM transmissions, while others are designed for designated radio frequency bands. The latter allows one wideband radio signal to carry a multiplex of several radio-channels of various bitrates as well as data services and other forms of media. Some digital broadcasting systems allow single-frequency network (SFN), where all terrestrial transmitters in a region sending the same multiplex of radio programs may use the same frequency channel without self-interference problems, further improving the system spectral efficiency.

While digital broadcasting offers many potential benefits, its introduction has been hindered by a lack of global agreement on standards and many disadvantages. The DAB Eureka 147 standard for digital radio is coordinated by the World DMB Forum. This standard of digital radio technology was defined in the late 1980s, and is now being introduced in some European countries. Commercial DAB receivers began to be sold in 1999 and, by 2006, 500 million people were in the coverage area of DAB broadcasts, although by this time sales had only taken off in the UK and Denmark. In 2006 there are approximately 1,000 DAB stations in operation.[2] There have been criticisms of the Eureka 147 standard and so a new ‘DAB+‘ standard has been introduced.

The DRM standard has been used for several years to broadcast digitally on frequencies below 30 MHz (shortwave, mediumwave and longwave). Also there is now the extended standard DRM+, which is designed for VHF bands.[3] Tests of DRM+ has been made in countries such as in Brazil, Germany, France, India, Sri Lanka, the UK, Slovakia, Italy (incl. the Vatican), as well as Sweden.[4]

DRM+ is regarded[by whom?] as a more transparent and less costly standard than DAB+ and thus a better choice for local radio[citation needed]; commercial or community broadcasters. Although DAB+ has been introduced in Australia the government has concluded 2011 that a preference for DRM and DRM+ above HD Radio could be used to supplement DAB+ services in (some) local and regional areas.[citation needed]

To date the following standards have been defined for one-way digital radio:

The Central Region of Singapore is made up of 22 planning areas, of which 10 forms the Central Area. Planning areas that are part of the Central Area are italicised.

Written By
Shang Poh Poh
Comments

1 Comment

A WordPress Commenter

Hi, this is a comment.
To get started with moderating, editing, and deleting comments, please visit the Comments screen in the dashboard.
Commenter avatars come from Gravatar.

Comments for this post are closed.

Recent Posts
Recent Comments